The parking lot elevator at Terryberry Branch is not working. Members will need to use the accessible ramp at the Mohawk entrance and the inner elevator. We're working to get it fixed quickly.
Terryberry Branch Elevator Out of Order
1
Published:
Saturday, May 31, 2025 - 1:00pm
Public Computers - Audio Volume
Please note that the audio volume levels on our public computers are having issues. The estimated time of disruption is unknown at this time. Thank you for your patience.
All Branches and Bookmobile Stops
Published:
Thursday, May 29, 2025 - 4:00pm
Sherwood Branch - Temporary Closure
As the 1st floor renovation wraps up, the Sherwood Branch will be closed on Thursday, June 5, to reset the spaces. Service hours will resume on Friday, June 6. Thank you for your patience.
1
Published:
Thursday, May 29, 2025 - 11:00am
Concession Branch's Children's Department Closure for Repair
Concession Branch's children's department will be closed on the morning of Monday, June 2nd for minor repairs. We apologize for the inconvenience.
1
Published:
Monday, May 26, 2025 - 2:15pm
Mount Hope Branch Accessibile Ramp Not Available
The accessibility ramp at Mount Hope Branch is damaged. The handrail is not available. The ramp will not be available while being repaired. We aim to fix it quickly.
1
Published:
Friday, May 23, 2025 - 4:30pm
All Branches Closed - May 30, Staff Professional Development
All HPL Branches are closed on Friday May 30 for Staff Development. Bookmobile is off the road and Extended Access is not available. HPL's online card registration, catalogue and eResources are not available until 5pm due to scheduled maintenance. All branches reopen Saturday May 31.
All Branches and Bookmobile Stops
Published:
Monday, May 12, 2025 - 8:00am
Turner Park Branch - Roof Repair
Due to the ongoing roof repair project, noise and parking disruptions are expected to continue until the end of June. Thank you for your patience.
1
Published:
Monday, April 28, 2025 - 10:00am
Ancaster Branch - Temporary Relocation in May
Until Saturday May 31, the Ancaster Branch is temporarily relocated to the Ancaster Rotary Centre, 385 Jerseyville Road West, Ancaster. The Wilson Street branch is closed for a roof and HVAC replacement and is expected to reopen on Monday June 2 at 9am.
1
Published:
Wednesday, April 16, 2025 - 11:00am
Central Library - Microfilm Machine
The digital microfilm machines at Central Library are not working. A single analog machine is available, but it doesn't print. We aim to have the digital devices repaired as soon as possible. We apologize for the inconvenience.
1
Published:
Thursday, April 10, 2025 - 3:30pm
Phishing Scheme
Please be aware of online phishing attempts impersonating Hamilton Public Library and Library Staff. HPL does not solicit paid freelance opportunities through social media or other messaging applications. HPL does not request personal or banking information through social media or require financial compensation when reviewing job applications. Please report phishing schemes to communications@hpl.ca. If you think you are a victim of fraud, please call the Canadian Anti-Fraud Centre at 1-888-495-8501.
All Branches and Bookmobile Stops
Published:
Thursday, April 3, 2025 - 10:30am
Hamilton 3D Printing Collaboration
The 4th Floor of Central Library is abuzz with the sound of 3D printers creating face shields, face shield frames and ear savers to protect frontline workers batting COVID-19.
The printers come from the City of Hamilton, Hamilton Public Library, Hamilton-Wentworth Catholic District School Board, Hamilton-Wentworth District School Board and Innovation Factory. Further assistance comes from shop3D.
If you’d like to help with this collaborated effort, here are some answers to commonly asked questions.
Q. I have a 3D printer. How can I help?
A. Download the STL files below and start printing your own parts.
Face Shield Bracket
Q. What material should I use to print?
A. The recommended material is PLA. This has been tested and is the most sanitary.
Q. What are the suggest 3D print settings?
A. Here's the list:
- Units are in mm
- 100% infill
- No supports, rafts or brim necessary
- 0.3 mm layer height (for faster printing)
- 100 mm/sec or higher print speed
- No need to wait for the part to cool before removing. Hold it in the desired shape for a few seconds after
Q. Do I need to supply the elastics and visor sheets?
A. No. The team at Hamilton Public Library, in conjunction with the City of Hamilton, are sourcing these parts.
Q. Where do I send or drop off the items?
A. Please consolidate shipments/drop-offs if you plan to produce multiple items. Completed components can also be dropped off with Security at the Central Library (address below).
Please mail printed face shield component to:
Hamilton Public Library
Central Library
Attn: 3D PPE Parts Team
55 York Blvd.
Hamilton, ON L8N 4E4
Q. Where should I send materials to donate?
A. If you have plastic materials contact shop3D at sales@shop3D.ca, or call 905-501-8558. Shop3D is doing the laser cutting.
If you have filament you can contribute, send it to Central Library, 55 York St., Hamilton.
Q. Who can I contact if I need more information or have questions?
A. For more information about this project and links to the 3D files, please reach out on covidstop.ca
Q. How can I help raise awareness or share my contribution?
A. Please join the CovidStop Facebook group.
Q. Are there other groups doing similar in our community that I can help support?
A. Yes. The organizations listed below are also supporting community partners and accepting printed parts, volunteers or other support. Please check with each organization, as there are different designs and needs, depending on the respective group.
(If you are supporting 3D Printing or similar related non-profit initiatives and want to be included on this list please contact us and we will be happy to include you.)
Note: Recipient organizations should sterilize all PPE before distributing.
